論文- 庄子 哲雄 -
表示方法: 表示形式: 表示順:
件数:553件
[2008]
141.Role of High-temperature Creep Stress in Thermally Grown Oxide Growth of Thermal Barrier Coatings.[The 2008 International Thermal Spray Conference & Exposition (ITSC2008),(2008)]K. Ogawa, Y. Nakao, D. Seo, H. Miura, T. Shoji
142.Assessment of the Effects of Cold Work on Crack Initiation in a Light Water Environment using the Small-Punch Test.[Metallurgical and Materials Transactions,39A,(2008),1099-1108]ISSELIN Jerome, KAI Akira, SAKAGUCHI Kazuhiko & SHOJI Tetsuo
143.Continuous monitoring of stress corrosion cracking growth in type 316L stainless steel weldment using induced current potential drop technique at elevated temperature.[MODERN PHYSICS LETTERS B,22(11),(2008),881-886]Yasumoto Sato, Takeo Atsumi, Tetsuo Shoji
10.1142/S0217984908015541
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000256095500016&DestApp=WOS
144.Quantifying the Effects of Environmental Parameters on Crack Growth Rates of Non-sensitized Stainless Steel Materials in High Temperature Water.[Proceedings of JSCE Materials and Environments 2008, Oomiya, Japan,,(A-201),(2008),53-56]Zhanpeng Lu, Yoichi Takeda, Hiroyoshi Murakami, Koji Negishi, Tetsuo Shoji
145.Characteristic Distance of the Crack Tip Strain Rate Formulation for Quantification of the Stress Corrosion Crack Growth Rate.[Proceedings of JSCE Materials and Environments 2008, Oomiya, Japan,(A-202),(2008),57-60]Q. J. Peng, Y. Takeda, Z. P. Lu, J. Kuniya, T. Shoji
146.Fe(111) AND Fe-Cr(111) SURFACE H2O INTERACTION AT DIFFERENT TEMPERATURES BY QUANTUM CHEMICAL MOLECULAR DYNAMICS.[Proceedings of JSCE Materials and Environments 2008, Oomiya, Japan,(A-302),(2008),105-108]Nishith Kumar Das, Ken Suzuki, Yoichi Takeda, Kazuhiro Ogawa and Tetsuo Shoji
147.The Effect of Prior Deformation on the Stress Corrosion Cracking Growth Rate of Alloy 600 Materials in Simulated Pressurized Water Reactor Primary Water.[Corrosion Science,50(3),(2008),835-846]Seiya Yamazaki, Zhangpeng Lu, Yuzuru Ito, Yoichi Takeda, and Tetsuo Shoji
148.High-temperature Oxidation Behavior and Surface Roughness Evolution of VPS NiCrAlY Coating.[Journal of Thermal Spray Technology,17(1),(2008),136-143]D. Seo, K. Ogawa, T. Shoji, S. Murata
149.Effects of loading mode and water chemistry on stress corrosion crack growth behavior of 316L HAZ and weld metal materials in high temperature pure water.[Corrosion Science,50(3),(2008),625-638]Zhanpeng Lu, Tetsuo Shoji, Yoichi Takeda, Yuzuru Ito, Akira Kai and Nobuhisa Tsuchiya
150.The dependency of the crack growth rate on the loading pattern and temperature in stress corrosion cracking of strain-hardened 316L stainless steels in a simulated BWR environment.[Corrosion Science,50(3),(2008),698-712]Zhanpeng Lu, Tetsuo Shoji, Yoichi Takeda, Yuzuru Ito and Seiya Yamazaki
151.The effect of prior deformation on stress corrosion cracking growth rates of Alloy 600 materials in a simulated pressurized water reactor primary water.[CORROSION SCIENCE,50(3),(2008),835-846]Yamazaki Seiya, Lu Zhanpeng, Ito Yuzuru, Takeda Yoichi, Shoji Tetsuo
10.1016/j.corsci.2007.07.012
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000254665500024&DestApp=WOS
152.Transient and steady state crack growth kinetics for stress corrosion cracking of a cold worked 316L stainless steel in oxygenated pure water at different temperatures.[Corrosion Science,50(2),(2008),561-575]Zhanpeng Lu, Tetsuo Shoji, Yoichi Takeda, Yuzuru Ito, Akira Kai, Seiya Yamazaki
153.Simulation of stress corrosion cracking behavior in a tube-shaped specimen of nickel-based alloy 600.[Nuclear Engineering and Design,238(1),(2008),1-7]Yasumoto Sato, Kimio Watanabe, Tetsuo Shoji
[2007]
154.Effect of Particle Size Distribution on Isothermal Oxidation Characteristics of Plasma Sprayed CoNi- and CoCrAlY Coatings.[Journal of Thermal Spray Technology,16(5-6),(2007),954-966]Dowon Seo, Kazuhiro Ogawa, Tetsuo Shoji, Shozo Murata
155.Integral Layer Profile Analysis Investigation of High Temperature Oxidation of MCrAlY Coatings.[International Gas Turbine Congress 2007 Tokyo,(2007)]D. Seo, K. Ogawa, Y. Suzuki, K. Ichimura, T. Shoji, S. Murata
156.Effects of Loading Mode and Temperature on Stress Corrosion Crack Growth Rates of a Cold Worked 316L Stainless Steel in Oxygenated Pure Water at a Low K.[Corrosion,63(11),(2007),1021-1032]Zhanpeng Lu, Tetsuo Shoji, Yoichi Takeda, Akira Kai, Yuzuru Ito
157.Application of induced current potential drop technique for measurements of cracks on internal wall of tube-shaped specimens.[NDT & E international,40(7),(2007),497-504]Yasumoto Sato, Takeo Atsumi, Tetsuo Shoji
158.Dynamics of Water/Oxide/Metal Interfaces and Mechanisms of Environmentally Assisted Cracking.[Proceedings of the International Symposium on Research for Aging Management of Light Water Reactors and Its Future Trend (The 15th Anniversary of INSS),(7),(2007),1-24]Tetsuo Shoji, Yoichi Takeda, Zhanpeng Lu, Qunjia Peng, Krishnan Raja
159.Dynamics of Water/Oxide/Metal Interfaces and Mechanisms of Environmentally Assisted Cracking.[Proceedings of the International Symposium on Research for Aging Management of Light Water Reactors and Its Future Trend (The 15th Anniversary of INSS), Fukui City, JAPAN,(2007),7.1-24]D. Seo, K. Ogawa, Y. Suzuki, K. Ichimura, T. Shoji, S. Murata
160.Time-dependent Transition of Chemical Elements in Plasma Sprayed MCrAlY Coatings under High Temperature Oxidation.[21st International Conference on Surface Modification Technologies (SMT21), Paris, France, TS#3-2, Ecole des Mines de Paris,(2007),-8]Dowon Seo, Kazuhiro Ogawa, Yusuke Suzuki, Kenji Ichimura, Tetsuo Shoji, Shozo Murata
Page: [prev] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [next]
戻るこのページのトップへ
copyright(c)2005 Tohoku University