論文- 庄子 哲雄 -
表示方法: 表示形式: 表示順:
件数:553件
[1983]
521.テアリングモジュラスTWとき裂端近傍の応力ならびにひずみ場に基づくその評価.[日本機械学会論文集(A編),49(438),(1983),166-171]坂 真澄,庄子哲雄,高橋秀明,阿部博之
522.延性き裂伝ぱ抵抗としてのテアリングモジュラス(Tj, Tδ,Tw)の有効性に関する実験的検証.[日本機械学会論文集(A編),49,(1983),829-837]坂 真澄,安斎英哉,庄子哲雄,高橋秀明,阿部博之
[1982]
523.小形破壊じん性試験片による延性破壊抵抗の評価.[日本機械学会論文集(A編),48(433),(1982),1111-1119]橋田俊之,坂 真澄,安斎英哉,庄子哲雄,高橋秀明
524.Acoustic emission rating parameter for prediction of tearing instability in structural materials.[Eng. Fracture Mechanics,16(5),(1982),645-658]M. A. Khan, T. Shoji, H. Niitsuma, and H. Takahashi
525.Evaluation of Structural Integrity by Acoustic Emission and Fracture Mechanics Techniques.[Proc. 6th International Acoustic Emission Symposium, the Japanese Society for Non- Destructive Inspection.,(1982),531-541]M.A. Khan, T. Shoji and H. Takahashi
526.ボイラ過熱器官寿命評価のための複層合成灰腐食試験法.[防食技術,31(3),(1982),232-238]斎藤 喜久,庄子 哲雄
527.Acoustic Emission from Cleavage Microcracking in Alloy Steels..[Materials Science,16(2),(1982),118-126]M.A. Khan, T. Shoji and H. Takahashi
528.Characterization of Crack Toughness Behavior of Structural Steels by the Tearing Modulus Parameter and Acoustic Emission..[J. Testing and Evaluation,10(1),(1982),3-11]M.A. Khan, T. Shoji and H. Takahashi
529.Finite Deformation Analysis of COD, J-Integral and Crack Tip Intense Strain Region in Plane Strain Large-Scale Yielding.[J. Mech. Phys. Solids,30,(1982),209-224]M. Saka, T. Shoji, H. Takahashi and H. Abé
530.SA533B鋼溶接熱影響部の疲労亀裂成長に及ぼす高温水環境の影響..[材料,31(346),(1982),710-716]中島 甫,庄子 哲雄,辻 宏和,高橋 秀明,近藤 達男
531.腐食疲労亀裂成長に及ぼす力学的因子の役割..[材料,31(346),(1982),703-709]庄子 哲雄,中島 甫,近藤 達男,高橋 秀明
[1981]
532.ボイラS/H管の高温腐食およびクリ-プ環境下における寿命予測..[防食技術,31(3),(1981),196-201]庄子 哲雄,斎藤 喜久,高橋 秀明,鈴木 正彦
533.Detecting Acoustic Emission during Cyclic Crack Growth in Simulated BWR Environment.[ASTM STP,738,(1981),139-160]H. Nakajima, T. Shoji, M. Kikuchi, and H. Niitsuma
534.Fatigue Crack Growth Through Typical Weld HAZ Microstructures of SA533B Gr. B Steel in BWR Environment..[Proc. IAEA Specialists' Meeting on Subcritical Crack Growth, NUREG/CP-0044, Ed., W.H.Cullen,(1981),179-191]T. Kondo, H. Nakajima, T. Shoji and H. Takahashi
535.Role of Loading Variables in Environment Enhanaced Crack Growth for Water Cooled Nuclear Reactor Pressure Vesseel Steels..[Proc. IAEA Specialists' Meeting on Subcritical Crack Growth, NUREG/CP-0044, Ed., W.H.Cullen,2,(1981),143-171]T. Shoji, H. Takahashi, H. Nakajima and T. Kondo
536.Evaluation of Radiation Damage in Reactor Pressure Vessel Steel by Elastic-Plastic Fracture Mechanics.[Trans. ASME, J. Engineering Materials and Technology,103(3),(1981),276-281]M.A. Khan, T. Shoji, H. Takahashi and M. Suzuki
537.Virtual Initiation Analysis of a Ductile Crack in Plane Strain Large-Scale Yielding.[Res Mech. Lett.,1,(1981),35-38]M. Saka, T. Shoji, H. Takahashi and H. Abé
538.A New Parameter for Characterizing Corrosion Fatigue Crack Growth.[Trans. ASME, J. Engineering Materials and Technology,103(3),(1981),298-304]T. Shoji, H. Takahashi, M. suzuki and T. Kondo
539.Determination of Crack Tip Energy Dissipation and Elastic-Plastic Fracture Toughness Parameter with Ductile Crack Extension.[J. Testing and Evaluation,9(11),(1981),268-278]T. Shoji
540.Significance of the Acoustic Emission Technique in Monitoring Cleavage Controlled Instability.[Res. Mechanica Letters,1(3),(1981),133-138]M.A. Khan, T. Shoji and H. Takahashi
Page: [prev] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [next]
戻るこのページのトップへ
copyright(c)2005 Tohoku University