著書論文等- 庄子 哲雄 -
表示方法: 表示形式: 表示順:
[]:著書 []:論文 []:総説・解説記事
件数:1350件
[2018]
1.[] The oxidation behavior of 316L in simulated pressurized water reactor environments with cyclically changing concentrations of dissolved oxygen and hydrogen.[Journal of Nuclear Materials,511, (2018), 417-427]Xiangyu Zhong, Shuang Xia, Jian Xu, Jian Xu, Tetsuo Shoji
10.1016/j.jnucmat.2018.09.049
http://www.scopus.com/inward/record.url?eid=85054012419&partnerID=40
2.[] Development of heat-resistant Fe-based alloys for A-USC steam boiler using ultra-high purity (UHP) technology.[Corrosion Science,144, (2018), 89-96]Fethi Hamdani, Tetsuo Shoji
10.1016/j.corsci.2018.08.043
http://www.scopus.com/inward/record.url?eid=85052800880&partnerID=40
3.[] Characterizations of the Microstructure of 9Cr-1Mo Steel Weld Joint After Long-Term Service in a Supercritical Fossil Power Plant.[Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,49, (2018), 4700-4709]Jian Xu, Xiangyu Zhong, Tetsuo Shoji, Tadashi Tatsuki, Yuji Matsumura, Makoto Nakashima
10.1007/s11661-018-4821-y
http://www.scopus.com/inward/record.url?eid=85049690601&partnerID=40
4.[] Microstructure and pitting behavior of the dissimilar metal weld of 309L cladding and low alloy steel A533B.[JOURNAL OF NUCLEAR MATERIALS,508,(2018),1-11]Wang Zihao, Xu Jian, Shoji Tetsuo, Takeda Yoichi, Yuya Hideki, Ooyama Masataka
10.1016/j.jnucmat.2018.05.011
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000439134500001&DestApp=WOS
5.[] 超高純度鉄基耐熱合金の開発.[ふぇらむ,23(8),(2018),392‐399-]庄子哲雄, HAMDANI Fethi, HAMDANI Fethi
6.[] 超高純度鉄基耐熱合金の開発.[ふぇらむ,23(8), (2018), 392‐399-]庄子哲雄, HAMDANI Fethi, HAMDANI Fethi
7.[] Adsorption and diffusion of H and O on an Ni(111) surface containing different amounts of Cr.[APPLIED SURFACE SCIENCE,445,(2018),217-228]Das Nishith Kumar, Shoji Tetsuo
10.1016/j.apsusc.2018.03.134
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000430477900029&DestApp=WOS
8.[] Development of Ultra-high Purity (UHP) Fe-Based Alloys with High Creep and Oxidation Resistance for A-USC Technology.[METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,49A(6),(2018),2373-2383]Hamdani Fethi, Das Nishith K., Shoji Tetsuo
10.1007/s11661-018-4545-z
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000431267700036&DestApp=WOS
9.[] An electrochemical method for detection and quantification of Laves phase in 12Cr martensitic stainless steel.[CORROSION SCIENCE,135,(2018),215-221]Wang Zihao, Xu Jian, Takeda Yoichi, Shoji Tetsuo, Watanabe Yasuaki, Yamashita Mitsuo, Izumi Sakae
10.1016/j.corsci.2018.02.049
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000429513700020&DestApp=WOS
10.[] Effect of thermal aging on oxide film of stainless steel weld overlay cladding exposed to high temperature water.[MATERIALS CHARACTERIZATION,138,(2018),195-207]Cao Xinyuan, Zhu Ping, Wang Wei, Liu Tingguang, Lu Yonghao, Shoji Tetsuo
10.1016/j.matchar.2018.02.010
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000428483400022&DestApp=WOS
11.[] Oxidation Behavior of UHP Fe-Based Model Alloy and SUS310S Steel in Superheated Steam and Supercritical Water Conditions.[OXIDATION OF METALS,89(3-4),(2018),319-330]Hamdani Fethi, Shoji Tetsuo
10.1007/s11085-017-9788-3
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000426942500002&DestApp=WOS
12.[] The synergy of corrosion and fretting wear process on Inconel 690 in the high temperature high pressure water environment.[JOURNAL OF NUCLEAR MATERIALS,502,(2018),255-262]Wang Zihao, Xu Jian, Li Jie, Xin Long, Lu Yonghao, Shoji Tetsuo, Takeda Yoichi, Otsuka Yuichi, Mutoh Yoshiharu
10.1016/j.jnucmat.2018.02.021
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000427676700028&DestApp=WOS
13.[] Precipitation behavior of stainless steel weld overlay cladding exposed to a long-term thermal aging.[MATERIALS CHARACTERIZATION,137,(2018),77-83]Cao Xinyuan, Zhu Ping, Wang Wei, Liu Tingguang, Lu Yonghao, Shoji Tetsuo
10.1016/j.matchar.2018.01.018
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000426233800009&DestApp=WOS
14.[] Three-dimensional study of grain boundary engineering effects on intergranular stress corrosion cracking of 316 stainless steel in high temperature water.[JOURNAL OF NUCLEAR MATERIALS,498,(2018),290-299]Liu Tingguang, Xia Shuang, Bai Qin, Zhou Bangxin, Zhang Lefu, Lu Yonghao, Shoji Tetsuo
10.1016/j.jnucmat.2017.10.004
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000418472300032&DestApp=WOS
15.[] 連携記事 超高純度鉄基耐熱合金の開発.[ふぇらむ = Bulletin of the Iron and Steel Institute of Japan : (一社)日本鉄鋼協会会報,23(8), (2018), 392-399]庄子 哲雄, Hamdani Fethi
[2017]
16.[] The topology of three-dimensional grain boundary network and its influence on stress corrosion crack propagation characteristics in austenitic stainless steel in a simulated BWR environment.[CORROSION SCIENCE,129,(2017),161-168]Liu Tingguang, Xia Shuang, Shoji Tetsuo, Bai Qin, Zhou Bangxin, Lu Yonghao
10.1016/j.corsci.2017.10.003
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000416190800015&DestApp=WOS
17.[] Retarding effect of prior-overloading on stress corrosion cracking of cold rolled 316L SS in simulated PWR water environment.[JOURNAL OF NUCLEAR MATERIALS,496,(2017),313-324]Chen Junjie, Lu Zhanpeng, Xiao Qian, Ru Xiangkun, Ma Jiarong, Shoji Tetsuo
10.1016/j.jnucmat.2017.10.005
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000414205500034&DestApp=WOS
18.[] An investigation on microstructure and pitting corrosion behavior of 316L stainless steel weld joint.[JOURNAL OF MATERIALS RESEARCH,32(20),(2017),3904-3911]Zhu Ping, Cao Xinyuan, Wang Wei, Zhao Jiancang, Lu Yonghao, Shoji Tetsuo
10.1557/jmr.2017.316
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000413979000012&DestApp=WOS
19.[] Damage mechanism of Alloy 690TT mated with Type 304 stainless steel during fretting wear in partial slip regime.[MATERIALS CHARACTERIZATION,132,(2017),284-292]Xin Long, Luo Huijuan, Han Junling, Lu Yonghao, Shoji Tetsuo
10.1016/j.matchar.2017.08.024
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000413878800033&DestApp=WOS
20.[] In-situ observation on twin boundary evolution and crack initiation behavior during tensile test on 316L austenitic stainless steel.[MATERIALS CHARACTERIZATION,132,(2017),169-174]Wang Wei, Liu Tingguang, Cao Xinyuan, Lu Yonghao, Shoji Tetsuo
10.1016/j.matchar.2017.08.020
http://gateway.isiknowledge.com/gateway/Gateway.cgi?&GWVersion=2&SrcAuth=TohokuUniv&SrcApp=TohokuUniv&DestLinkType=FullRecord&KeyUT=WOS:000413878800020&DestApp=WOS
Page: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [next]
戻るこのページのトップへ
copyright(c)2005 Tohoku University