Original Papers- GOTO Takashi -
number of results to view: what to display: sort:
total:771
[2013]
241.Quantitative evaluation of the oxidation behavior of ZrB2-15 vol.%SiC at a low oxygen partial pressure.[Vacuum,88,(2013),98-102]Ai Momozawa, Rong Tu, Takashi Goto, Yuuki Kubota, Hiroshi Hatta, Kimiya Komurasaki
10.1016/j.vacuum.2012.04.004
242.Precipitation of Ni nanoparticle on Al2O3 powders by novel rotary chemical vapor deposition.[JOURNAL OF THE CERAMIC SOCIETY OF JAPAN,121(1410),(2013),226-229]Zhang, JF; Tu, R; Goto, T
10.2109/jcersj2.121.226
243.Preparation of the c-axis oriented AlN film by laser chemical vapor deposition using a newly proposed Al(acac)3 precursor.[Journal of Crystal Growth,365,(2013),1-5]Yu You, Akihiko Ito, Rong Tu, Takashi Goto
10.1016/j.jcrysgro.2012.12.034
244.Transparent Lu3NbO7 bodies prepared by reactive spark plasma sintering and their optical and mechanical properties.[Ceramics International,39(1),(2013),383-387]Liqiong An, Akihiko Ito, Takashi Goto
10.1016/j.ceramint.2012.06.038
245.Preparation of the catalyst for methanol steam reforming from Cr–Zr amorphous alloys.[Materials Science Forum Vol.761: Eco-Materials Processing and Design XIV,(2013),7-10]Toshiya Matsusako, Takami Kai, Tsutomu Nakazato, Hisamichi Kimura, Takashi Goto, Hidemi Kato
10.4028/www.scientific.net/MSF.761.7
[2012]
246.B deficiency in TiB2 and B solid solution in TiN in TiN–TiB2 composites prepared by spark plasma sintering.[Journal of the European Ceramic Society,32(16),(2012),4021-4024]Mettaya Kitiwan, Akihiko Ito, Takashi Goto
10.1016/j.jeurceramsoc.2012.06.024
247.Basic study of Eu2+-doped garnet ceramic scintillator produced by spark plasma sintering.[Optical Materials,35(2),(2012),222-226]Makoto Sugiyama, Takayuki Yanagida, Yutaka Fujimoto, Yuui Yokota, Akihiko Ito, Martin Nikl, Takashi Goto, Akira Yoshikawa
10.1016/j.optmat.2012.08.008
248.Effect of laser power on microstructure and dielectric properties of BaTi5O11 films prepared by laser chemical vapor deposition method.[Journal of Materials Science: Materials in Electronics,23(11),(2012),1961-1964]D.Y. Guo, A. Ito, T. Goto, R. Tu, C.B. Wang, Q. Shen, L. Zhang
10.1007/s10854-012-0688-7
249.Thermal and Electrical Transport Properties of Zr-Based Bulk Metallic Glassy Alloys with High Glass-Forming Ability.[Materials Transactions,53(10),(2012),1721-1725]Rie Y. Umetsu, Rong Tu, Takashi Goto
10.2320/matertrans.M2012163
250.Scintillation Characteristics of Undoped Single Crystals and Ceramics.[IEEE Transactions on Nuclear Science,59(5),(2012),2594-2600]Akihiro Fukabori, Liqiong An, Akihiko Ito, Valery Chani, Kei Kamada, Takashi Goto, Akira Yoshikawa
10.1109/TNS.2012.2206211
251.High-speed epitaxial growth of BaTi2O5 thick films and their in-plane orientations.[Applied Surface Science,259,(2012),178-185]Dongyun Guo, Akihiko Ito, Rong Tu, Takashi Goto
10.1016/j.apsusc.2012.07.016
252.Effect of sintering temperature on the transparency and mechanical properties of lutetium aluminum garnet fabricated by spark plasma sintering.[Journal of the European Ceramic Society,32(12),(2012),3097-3102]Liqiong An, Akihiko Ito, Takashi Goto
10.1016/j.jeurceramsoc.2012.04.020
253.Evaluation of CVD-Deposited SiO2 as a Sintering Aid for Boron Nitride Consolidated with Alumina by Spark Plasma Sintering.[Journal of the American Ceramic Society,95(9),(2012),2827-2832]Jianfeng Zhang, Rong Tu, Takashi Goto
10.1111/j.1551-2916.2012.05269.x
254.High-Speed Epitaxial Growth of β-SiC Film on Si(111) Single Crystal by Laser Chemical Vapor Deposition.[Journal of the American Ceramic Society,95(9),(2012),2782-2784]Song Zhang, Rong Tu,Takashi Goto
10.1111/j.1551-2916.2012.05354.x
255.Preparation of (020)-oriented BaTi2O5 thick films and their dielectric responses.[Journal of the European Ceramic Society,32(10),(2012),2459-2467]A. Ito, D.Y. Guo, R. Tu, T. Goto
10.1016/j.jeurceramsoc.2012.02.022
256.Effect of calcination temperature on fabrication of transparent lutetium titanate by spark plasma sintering.[Ceramics International,38(6),(2012),4973-4977]L.Q. An, A. Ito, T. Goto
10.1016/j.ceramint.2012.02.092
257.Densification of SiO2–cBN composites by using Ni nanoparticle and SiO2 nanolayer coated cBN powder.[Ceramics International,38(6),(2012),4961-4966]Jianfeng Zhang, Rong Tu, Takashi Goto
10.1016/j.ceramint.2012.02.090
258.Effect of laser power on orientation and microstructure of Ba2TiO4 film prepared by laser chemical vapor deposition.[Applied Surface Science,258(20),(2012),7860-7863]Dongyun Guo, Takashi Goto, Chuanbin Wang, Qiang Shen, Lianmeng Zhang
10.1016/j.apsusc.2012.04.104
259.Compositional regions of single phases at 1800 °C in Mo-rich Mo–Si–B ternary system.[Materials Science and Engineering A,552,(2012),179-188]Seong-Ho Ha, Kyosuke Yoshimi, Kouichi Maruyama, Rong Tu, Takashi Goto
10.1016/j.msea.2012.05.028
260.Biomechanical Evaluation of Amorphous Calcium Phosphate Coated TNTZ Implants Prepared Using a Radiofrequency Magnetron Sputtering System.[Materials Transactions,53(7),(2012),1343-1348]Naru Shiraishi, Rong Tu, Risa Uzuka, Takahisa Anada, Takayuki Narushima, Takashi Goto, Mitsuo Niinomi, Keiichi Sasaki, Osamu Suzuki
10.2320/matertrans.M2012078
Page: [prev] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [next]
BackTop
copyright(c)2005 Tohoku University