Original Papers- KANO Junya -
number of results to view: what to display: sort:
total:157
[2019]
1.液中転動ボールミルの粉砕結果とDEMシミュレーションによるボール挙動の分析との整合性の検討.[粉体工学会誌,56(3),(2019),148-155]近藤光、石原真吾、久志本築、小澤隆弘、加納純也、内藤牧男
2.離散要素法による金属粉粒体の変形挙動シミュレーションの開発.[粉体工学会誌,56(2),(2019),58-65]小野宏輔、久志本築、石原真吾、加納純也
[2018]
3.Analysis for Behavior of Particles to Be Ground between Grinding Balls in Wet Ball Milling.[Journal of Japan Society of Powder and Powder Metallurgy,65(10),(2018),664-672]Kizuku KUSHIMOTO, Shingo ISHIHARA and Junya KANO
4.ADEMシミュレーションモデルによる粉体圧縮成形における粉化・圧密挙動の解析.[粉体工学会誌,55(9),(2018),492-498]石原真吾,久志本築,加納純也,内藤牧男
5.Discrete element method simulations of mechanical plating of composite coatings on aluminum substrates.[SURFACE & COATINGS TECHNOLOGY,349,(2018),949-958]Renata Khasenova, Sergey Komarov, Shingo Ishihara, Junya Kano, V. Yu. Zadorozhnyy
[2017]
6.連続遊星ミルによる再生細骨材製造における消費動力の推定.[廃棄物資源循環学会論文誌,28,(2017),68-75]池尾陽作, 米澤敏男, 加納純也, 石原真吾
[2016]
7.Evaluation of particle density effect for mixing behavior in a rotating drum mixer by DEM simulation.[Advanced Powder Technology,27(3),(2016),864-870]Michinori Yamamoto, Shingo Ishihara, Junya Kano
8.A new approach for hydrogen generation from sewage sludge.[Bioresource Technology,201(2),(2016),191-194]Qiwu Zhang, Junya Kano
[2015]
9.DEMシミュレーションを用いた回転ドラムにおける粒子形状が混合に及ぼす影響評価.[粉体工学会誌,52(8),(2015),445-452]山本通典, 石原真吾, 加納純也
10.乾燥を要しない粉砕と低温加熱によるバイオマスからの高純度水素の製造.[セラミックス,50(4),(2015),303-309]張 其武, 加納純也, 齋藤文良, 松本 満
[2014]
11.High-purity hydrogen gas production by catalytic thermal decomposition using mechanochemical treatment.[Inter. J. Hydrogen Energy,39(31),(2014),17554-17562]Kanatip Kumproa Apinon Nuntiya Qiwu Zhang Junya Kano Fumio Saito
12.Mechanochemical formation of K-Si-Ca-O compound as a slow-release fertilizer.[Powder Technology,260(7),(2014),22-26]Wenyi Yuan, Solihin, Qiwu Zhang, Junya Kano, Fumio Saito
13.Development of Prediction Method of Wear Rate during Wet Stirred Milling by Using DEM.[Journal of the Society of Powder Technology,51(6),(2014),436-443]Rikio Soda, Akira Sato, Junya Kano, Fumio Saito
14.ADEM Simulatuion of Particle Breakage Behavior.[Journal of the Society of Powder Technology,51(6),(2014),407-414]Shingo Ishihara, Qiwu Zhang, Junya Kano
15.Mechanochemical destruction of decabromodiphenyl ether into visible light photocatalyst BiOBr.[RSC Advances,(4),(2014),14719-14724]Kunlun Zhang, Jun Huang, Haizhu Wang, Gang Yu, Bin Wang, Shubo Deng, Junya KANO, Qiwu Zhang
[2013]
16.Influence of the Blades Geometry on the Mixing Phenomena in an Agitating Mixer.[Jarnal of the Society of Powder Technology,Japan,50(12),(2013),851-856]Michinori Yamamoto, Shingo Ishihara, Junya Kano
17.DEM Simulation of Collapse Phenomena of Packed Bed of Raw Materials for Iron Ore Sinter during Charging.[ISIJ International,53(9),(2013),1555-1560]Shingo ISHIHARA, Rikio SODA, Qiwu ZHANG, Junya KANO
[2012]
18.DEM simulation of bead motion during wet bead milling using an enlarged particle model.[International Journal of Mineral Processing,(2012),93-99]Yasuhiro Yamamoto, Rikio Soda, Junya Kano, Fumio Saito
19.DEM Simulation of Sieving Process about Rod-like Particles.[粉体工学会誌,49(11),(2012),818-826]Keiji Yamane, Shingo Ishihara, Rikio Soda, Junya Kano, Fumio Saito
20.Development of Recycling Process for Waste FRP Mortar Pipe.[粉体工学会誌,49(11),(2012),827-831]Akira Kondo, Takahiro Ohmura, Hiroya Abe, Junya Kano, Makio Naito
Page: [1] [2] [3] [4] [5] [6] [7] [8] [next]
BackTop
copyright(c)2005 Tohoku University